This series of CNC horizontal lifting table milling machine is easy to operate and reliable in performance. It is widely used in various mechanical processing departments to process various planes, grooves, gears, etc.Equipped with milling machine accessories such as milling head, round table, and indexing head, the scope of use of the machine tool can be further expanded.Structural and performance characteristics The machine tool has good structural rigidity and can withstand heavy-duty cutting; the machine tool spindle motor has high power and a wide range of speed changes, which can fully exert the tool's performance and can perform high-speed cutting; the wear-resistant castings of the machine tool are made of vanadium-titanium wear-resistant cast iron, important transmission parts High-quality alloy steel is used to ensure the durability and stability of the machine tool; the machine tool has a complete lubrication system.CNC milling machine model unit XKA6132 XKA6140 Workbench Workbench (width*length) mm 320*1325 320*1700 400*1700 400*2000 Maximum load capacity kg 500 450 800 750 Number of T-slots 3 3 3 3 T-slot width mm 18 18 18 18 T-slot spacing mm 70 70 90 90 Stroke Larger longitudinal stroke of worktable X mm 780 980 900 1200 Larger horizontal stroke of worktable Y mm 255 255 315 315 Maximum lifting stroke of worktable Z mm 320 320 335 335 table accuracy table positioning accuracy mm 0.035 0.035 0.035 0.045 table repeat positioning accuracy mm 0.025 0.025 0.025 0.035 spindle taper 7:24 (ISO NO.50) 7:24 (ISO NO.50) 7:24 (ISO NO .50) 7:24 (ISO NO.51) Spindle bore diameter mm 29 29 29 29 Spindle axial movement distance mm 85 85 Distance from spindle axis to bottom surface of cantilever beam mm 155 155 190 190 Min/maximum distance from spindle end face to table surface mm 30-350 30-350 30-570 30-570 The distance from the vertical guide rail of the bed to the center of the T-slot in the center of the table mm 215/470 215/470 235-580 235-580 The number of spindle speed steps step 18 18 18 18 The spindle speed range r/min 30-1500 30-1500 30-1500 30-1500 Feed X-axis feed range mm/min 6-3500 6-3500 6-3500 6-3500 Y-axis feed range mm/min 6-3500 6-3500 6-3500 6-3500 Z-axis feed range mm/min 6-1800 6-1800 6-1800 6-1800 Motor power total capacity KVA 23 23 25 25 Main motor power KW 7.5 7.5 11 11 Main motor speed r/min 1450 1440 1450 1450 Longitudinal X feed motor torque Nm 5 10 10 10 Horizontal Y feed motor torque Nm 10 10 10 10 Lift Z feed motor torque Nm 15 15 27 27 Cooling pump motor power KW 0.125 0.125 0.125 0.125 Cooling Pump speed output flow L/min 18 18 18 18Other power requirements vhz 380V±10%, 50HZ±1HZ 380V±10%, 50HZ±1HZ 380V±10%, 50HZ±1HZ 380V±10%, 50HZ±2HZ Machine tool dimensions (length*width*height) mm 2273*1770 *1665 2550*1770*1655 2600*2190*2400 2600*2600*2400 Machine weight kg 2850 2850 3850 3900 Control cabinet size (length*width*height) mm 450*420*1200 450*420*1200 450*420*1200 450*420*1200 Control box size (length*width*height) mm 450*420*280 450*420*280 450*420*280 450*420*280 Control box weight kg 30 30 30 30
