CS715 bed milling machine, CS716 bed milling machine - main structural features: 1. The main components such as the bottom body, worktable, and middle sliding seat are all cast from high-strength materials and artificially aged to ensure the long-term use of the milling machine stability.2. The overall structure is a bed structure, the milling head is a high-power mechanical speed-adjusting high-precision milling head, and the milling head can work within the range of 20° left and right; the feed of the spindle sleeve has automatic, manual, manual fine-tuning, etc. Function: the main shaft has high rigidity, convenient and flexible speed regulation.3. The spindle box can be manually or motorized up and down to complete motorized feeding and rapid movement, and the operation is convenient and fast.4. There are three types of manual feed, motorized feed and motorized fast feed in the vertical and horizontal directions on the bed. Different feed speeds can meet different processing requirements; fast feed can make the workpiece reach the processing position quickly and shorten the non-processing time. .5. The X-direction stroke of the workbench can reach 1400mm, which expands the machining range of the machine tool. The Y and Z guide rails are wide rectangular guide rails, and the X, Y and Z three-direction guide rails are subjected to super-audio frequency quenching, precision grinding and scraping treatment. Cooperate with forced lubrication to reduce low-speed crawling, improve precision and prolong the service life of the machine tool.6. The lubricating device can carry out forced lubrication on the vertical, horizontal and vertical screw and guide rail, reduce the wear of the machine tool, and ensure the efficient operation of the machine tool; at the same time, the cooling system can change the flow rate of the coolant by adjusting the nozzle to meet different requirements. processing needs.7. The operating system of the machine tool is suspended on the upper right side of the machine tool through the support arm, which conforms to the principle of ergonomics and is easy to operate; the operation panel is designed with visual symbols, which is simple and intuitive.8. Optional digital display. Bed milling machine-specification CS715 CS716 Worktable size (length x width) (mm) 1600×400 2000×400 worktable maximum stroke (vertical/horizontal) (mm) 1050/500 1400/ 500 Table "t" groove (number of slots/width/spacing) mm 3/18/100 3/18/100 Spindle hole taper iso50 iso50 Spindle end face to table surface distance (mm) 100-630 100-630 Spindle center Distance to column guide rail surface (mm) 580 580 Spindle speed range (rpm) 20-1600 66-960 Headstock rotation angle ±30° ±30° Sleeve stroke (mm) 105 105 Worktable motor feed range (18 levels) (mm/min) Vertical and horizontal: 23.5-1180 Vertical and horizontal: 23.5-1180 Vertical: 11.75-590 Vertical: 11.75-590 Rapid movement speed of worktable (mm/min) Vertical and horizontal: 2300 Vertical and horizontal: 2300 Vertical direction: 1150 Vertical direction: 1150 Main motor power (kw) 7.5 11 Motor feed motor power (w) 1500 1500 Cooling pump motor power (w) 90 90 Dimensions (length×width×height) 2390×1860×2220 2800×1860×2220 Net weight (kg) 4690 4900
