2023-06-22

H46 axial, suitable for processing all kinds of small and medium-sized plate parts, cutting can be all kinds of screw thread, interior and exterior surface of circular arc, cone and plane. Main shaft adopts precision spindle unit, low noise, high speed, long service life, adopts servo spindle drive, low speed and output torque is large, vertical and horizontal guide rail with precision linear guide rail pair, high positioning accuracy, good stability. Can install multiple tool post, at the same time to save the tool change time, to make up for the location and height of the error when rotating.

Skill on bed more Φ spiral diameter 460 mm
Art of horizontal slip board more Φ spiral diameter 140 mm
Collet chuck CL - 42 a5 refs
Several elastic collet 173 e

X 350 mm

The Z axis stroke 330 mm

Guide line rail

Spindle speed 4000 RPM

The spindle nose A2-5

Allows bar Φ 40 mm

Fast displacement X: 20 Z: 20 m/min

The spindle motor power 5.5 KW

With a knife base 20 mm from the center of the spindle

20 * 20 mm cutter bar section size

The tool number of dao is 4

X/Z set minimum unit of 0.001 mm

X/Z positioning accuracy of 0.01 mm

Repeated positioning accuracy 0.005 mm X/Z

Weight is 2.2 T
Standard 1 ball screw (domestic)
Quasi linear guide rail (Taiwan) of silver
With 3 lubrication system (domestic)
Buy 4 cooling system (domestic)

5 lead screw bearings (domestic)

6 spindle unit (domestic)

7 collet (domestic)

8 hollow rotary oil cylinder (domestic)

9 hydraulic station system (domestic)

10 synchronous belt transmission

11 Taiwan CNC system (optional, such as: fanuc, Siemens)

12 Japan yaskawa servo motor

And the Lord of the domestic servo motor (5.5 kw)