|
|
|
|
|
|
XD1300, 1400150 0 end milling machine
|
|
Product introduction:
Large range of end milling machine, apply to casting, steel and other metal surfacing materials, widely used in mechanical manufacturing industry. Especially suitable for the plane milling, plastic formwork frame of the mould and die industry, can be carried out on the two long workpiece end face milling, drilling, boring and other special surface processing. End face milling machine milling workpiece plane, chamfering processing trapezoidal surface and T slot, drilling can be up to 50 mm phi, boring to phi 400 mm. Add bearing slide back to two long workpiece end face milling, manual drilling, boring and special surface processing, milling force is strong, can meet the machining requirements of parts. Table adopts planetary gear shifting, flexible operation is simple. Pillar lift unloading device of balancing is adopted, easy to move up and down, both to extend the service life of screw, and smooth cutting. Milling adopt bevel gear transmission, cutting and milling surface of high precision, low noise, after the installation of variable frequency device can implement stepless variable speed. The rigidity is strong, not easy to damage, easy maintenance, functional diversity, geometry size is large, it is an ideal equipment of mechanical processing
Machine tool features and use:
Machine is made of high quality resin sand molding, high strength cast iron, after tempering and vibration aging process, eliminate the internal stress, make the machine rigidity is strong, not easy to distort, guide by the super audio quenching treatment, enhance the service life of machine tools and mechanical properties, machine equipped with automatic oil lubrication system regularly. Machine is equipped with advanced ac frequency conversion vector control, the realization of the infinite speed, suspension of the button control panel, centralized control, adjustment and control is very convenient.
Machine is mainly used for processing all kinds of mechanical major, medium and small ferrous or non-ferrous metal parts of the vertical plane, inclined plane, straight groove milling, boring, reaming, reaming, etc.
Model XD1300 XD1400 XD1500
project
4000, 4500, 6000 KG weight
Shape size 3800 * 1680 * 2000 4300 * 1800 * 2000 5200 * 2200 * 3060
Mm (length x width x height)
Working length x width 1800 mm x 2000 x 680 x 800 3000 680
For stroke, 2000, 2500, 3000 mm
Table feed rate in mm/min gear shifting gear shift CVT
The feed motor 2.2 kw, 2.2 3
The spindle speed mm/min 75 105 150 210 300 420 75 105 150 210 300 420 75 105 150 210 300 420
The spindle horizontal stroke, 120, 120, 120 mm
The spindle taper hole "yet"
Milling head vertical stroke, 1000, 1000, 1000 mm
Horizontal stroke, 120, 120, 120 mm
Lifting motor 1.5 1.5 1.5 kw
Main motor 7.5 7.5 7.5 kw
Control form mechanical feed machinery feed feed
4 4 4 T slot number (a)
|
|
|
|
|
|
|
|
|
