|
|
|
|
|
|
XKR40 cradle five-axis machining center
|
|
XKH series of five-axis linkage blade machining center is to meet the needs of all kinds of blade processing, using international advanced technology, a new conceptual design r&d efficiency and precision of the five axes linkage blade machining center. Machine is suitable for processing all kinds of blades and all kinds of long narrow shape of parts, covers a variety of purposes, a variety of specifications and various material processing scope, the blades are widely used in energy and other industries.
Structure features:
A, double support double pendulum turntable: configuration cradle type rotary table, flexible, extending the processing capacity; On the parts should be no more than two pieces of clamping, reduce change not only cost savings, and can improve the precision of parts.
Second, the rotating shaft drive: two rotating shaft can be used worm gear and worm drive, compact structure, stable transmission; Can also be driven by torque motor, reduce wear and tear, improve the positioning precision and accuracy stable.
Three, full closed-loop control: full closed loop feedback measurement, linear coordinate with precision linear grating ruler, rotary and oscillating coordinates with precision encoder; Grating ruler with blowing protection device.
Four, the large capacity knife library: according to the requirements of customers processing configuration high-capacity knife library, with automatic knife library door, adopt the automatic tool change, change cutters can be arbitrary.
Five, the whole protection structure: monolithic machine tool protection; Straight axis with stainless steel rail protective cover; Electrical control cabinet adopts fully enclosed structure, effective dust, oil mist, good sealing, With safety lock, implement to open the door without electricity.
Six, motorized spindle system: adopting large power precision motorized spindle, high speed, good rigidity, high precision rotary; Configuration of precision cooling system with the spindle taper hole, the handle locating surface cleaning function.
Technical parameters:
project
unit
XKR25
XKR32
XKR40
XKR50A
XKR63
XKR65
The scope of work
The workbench diameter
mm
250
320
400
500
630
650
Above the workbench to the spindle end plane distance
mm
140-460.
150-550.
150-610.
X, Y, Z axis
mm
520/260/320
500/500/400
650/650/460
730/650/500
A shaft
+ 100 ° to 10 °
- + 10 ° 110 °
- + 90 ° 120 °
C axis
N x 360 °
feed
X, Y, Z axis
m/min
15
30
36
A shaft
R/min
20
15
25
C axis
R/min
20
The spindle
Spindle speed
rpm
16000
8000
10000
16000
18000
The spindle taper hole
HSK50E
BT30
BT40
HSK63A
HSKA63
Spindle power
Kw
18
3.7
7.5
30
Knife library
Dao database is
pcs
16
20
30
The largest diameter cutter
mm
Phi 63
Phi 76
Phi 76
Phi 80
The biggest tool length
mm
220
175
200
220
300
Power supply
Full load current
A
200
Compressed air pressure
mpa
> 0.6
0.5-0.8
The power supply requirements
380 (1 + / - 10%) V 50 hz
Machine size
Machine tool shape dimension
mm
2600 x 2600
2600 x 2600
3050 x 2650
4000 x 5000
2800 x 3700
3400 x 2400
Machine covers an area of size
mm
4200 x 4600
4200 x 4700
3900 x 5700
4650 x 5850
3690 x 2600
Height of machine tool
mm
Main configuration:
1. The resin sand casting
2. Three axis of silver ball screw Taiwan.
3. Precision lock nut.
4. Taiwan spindle (masters), Japan NSK bearings, spindle pulleys and belt.
5. Taiwan pressure cylinder (yet).
6. Imported bearing, Japan NSK).
7. Domestic high quality coupling.
8 X, Y, Z (bottom) stainless steel rail protection.
9. Imported electronic lubrication pump valley (Japan).
10. Domestic cooling system including water pump, water tank.
11. Pneumatic components (Germany), a guest.
12. The spindle box heavy hammer weight.
13. Optional: automatic spiral chip removal function.
14. System brand optional: number of FANUC, wide, Siemens, Kane, mitsubishi.
15. Disc type knife library BT40 - T24 (Taiwan become yet).
16. With the function of spindle oil cooling, blowing center.
17 major appliances: SCHNETDER (schneider).
|
|
|
|
|
|
|
|
|
